Hardway V2 Frame

Designed for Street Riding with a Steep 75.5 Degree Head Tube Angle, a Short 13" Rear End, No Brakes, and Clearance for Wide 2.4" Tires.

New for the V2 are a shorter rear end, smaller diameter chainstays for improved tire and sprocket clearance, a taller standover height, and no brake mounts.

Handcrafted in the FBM Machine Shop in Ithaca, New York, USA

Check out the FBM Machine Shop >

FRAME OPTIONS
Colors	Gloss Black, Clear, Trans Red
Top Tube Lengths	20-1/2", 20-3/4", 21", 21.25"
FRAME GEOMETRY
Head Tube Angle	75.5 degrees
Head Tube Height	120mm
Bottom Bracket Height	11-7/8"
Seat Tube Angle	71 degrees
Standover Height	9"
Rear End Length	13" (slammed)
Dropout Spacing	113mm
FRAME WEIGHT
Weight	5lbs
FRAME COMPONENTS
Head Tube	Integrated - Externally machined 4130 Chromoly
Top Tube	1-1/4" O.D. Double Butted 4130 Chromoly
Top Tube Gusset	3D laser cut 4130 Chromoly
Down Tube	1-3/8" O.D. Double Butted 4130 Chromoly
Down Tube Gusset	3D laser cut 4130 Chromoly
Bottom Bracket	Mid - Internally machined 4130 Chromoly
Seat Tube	Internally Butted 4130 Chromoly
Seat Post Clamp	Integrated
Seat Stays	3/4” O. D. x 0.035" Wall tapered to 5/8" OD 4130 Chromoly
Chain Stays	Single Bend 3/4” O. D. x 0.049" Wall tapered to 5/8" OD 4130 Chromoly
Seat Stay Bridge	5/8" OD tube bridge 4130 Chromoly
Chain Stay Bridge	3/4" OD tube bridge 4130 Chromoly
Capped Stays	Yes
Dropouts	Heat treated 3/16" thick 4130 Chromoly for 14mm axles
Brake Type	None
WARRANTY INFO

Rear axle positions (with new chains)

25/9, 28/10 at 13.25" without a half link and 13.5" with a half link
28/9 at 13.125" with a half link and 13.375 without a half link